2026-11-19T02:23:46.724Z
Silver Coin Melt Value: How Much Is Your Silver Worth Right Now?
Silver Coin Melt Value: How Much Is Your Silver Worth Right Now?

Your silver coin melt value is the estimated worth of the silver inside a coin, based on the current silver price. It’s a useful starting point for collectors, stackers and traders, but it may not be what a dealer offers, or what a collectible coin is worth.
The basic calculation is simple: melt value = silver content in troy ounces × current spot price per troy ounce. The silver inside the coin does not change, but the spot price it is multiplied by moves through the day. Every figure in this guide is dated, and yours should be too.
Melt value vs. face value vs. collector value vs. dealer offer
These terms describe different ways of looking at the same coin. Knowing which one you’re comparing can help you make a more informed decision before buying or selling.
| Term | What it means |
|---|---|
| Melt value | The estimated value of the coin’s silver content at the current spot price. |
| Face value | The amount printed on the coin, such as 10¢, 25¢ or $1. |
| Collector value | What a coin may be worth to collectors, based on factors like date, mint mark and condition. |
| Dealer offer | What a dealer is willing to pay. It may be below melt value, or above it for a coin with collector demand. |
Melt value is a helpful baseline, not the price a dealer will pay. A dealer's offer can depend on the coin, the quantity, market conditions and the dealer's costs.
The silver coin melt value formula
Use this formula:
Melt value = silver content (troy oz) × current spot price per troy ounce
A troy ounce is the standard unit used to price precious metals. It weighs about 31.1 grams, slightly more than a regular ounce.
For a coin with 0.0723 troy ounces of silver, multiply 0.0723 by the current silver spot price. If spot is $42.83 per troy ounce, the calculation is 0.0723 × $42.83.

Silver content in common U.S. coins
The table below lists standard silver content per coin. ASW means “actual silver weight”: the amount of pure silver in the coin, expressed in troy ounces. Circulated coins may have lost some metal through wear.
| Coin type | Typical silver content | Silver per $1 face value |
|---|---|---|
| 90% silver dime | 0.0723 troy oz | About 0.715 oz for circulated dimes |
| 90% silver quarter | 0.1808 troy oz | About 0.715 oz for circulated quarters |
| 90% silver half dollar | 0.3617 troy oz | About 0.715 oz for circulated halves |
| 40% silver Kennedy half dollar | 0.1479 troy oz | About 0.2958 oz |
| Morgan or Peace silver dollar | 0.7734 troy oz | 0.7734 oz per $1 coin |
| American Silver Eagle | 1 troy oz, .999 fine | Not typically counted by face value |
| One-ounce silver round | Usually 1 troy oz, .999 or finer | Not typically counted by face value |
The circulated 90% coin shortcut is commonly expressed as about 0.715 troy ounces per $1 face value, for example, ten dimes or four quarters. For clarity, 0.0715 troy ounces is the shortcut per 10¢ face value, not per $1. The standard per-coin figures in the table are based on coin specifications; worn coins can weigh less.
Silver Eagles and silver rounds are different from older circulated coins: they’re sold as bullion products with a stated silver weight. Check the coin or round’s specifications, especially for older or unusual pieces. For another reference, see NGC’s U.S. silver coin melt-value guide.
Worked example: calculating value at $42.83 per ounce
Dated example, not a live quote: In late U.S. trading on November 19, 2026, spot silver was about $42.83 per troy ounce, down roughly $2.12 or 4.7% on the session, according to Kitco’s afternoon report that day. Silver prices move, so treat this as the spot price at one moment.
For one 90% silver dime:
- Silver content: 0.0723 troy oz
- Spot price at that reading: $42.83 per troy oz
- Calculation: 0.0723 × $42.83 = about $3.10 melt value
For one Morgan dollar:
- Silver content: 0.7734 troy oz
- Spot price at that reading: $42.83 per troy oz
- Calculation: 0.7734 × $42.83 = about $33.12 melt value
These results estimate the metal value, not a dealer’s offer or the coin’s full collector value. A worn coin may contain slightly less silver than its original specification, while a collectible coin may be worth more than its melt value.
Why your melt value changes while you watch
Melt value is arithmetic, not a fixed price. The silver content of a 90% dime never changes, but the number it is multiplied by can move several percent in one session. Since the close on Friday, November 13, 2026, silver has lost more than 7%, according to GoldSilver’s market report on November 19, and it fell about 4.7% on November 19 alone. Nothing about the coins changed. Only the multiplier did.
Because the multiplier moves, the same pile of coins has a different melt value at every spot price. This table shows the spread without predicting where spot goes next.
| Spot price per troy oz | $1 face value of 90% silver | One 90% dime | One Morgan or Peace dollar | One 1 oz silver round |
|---|---|---|---|---|
| $38.00 | $27.17 | $2.75 | $29.39 | $38.00 |
| $42.83 | $30.62 | $3.10 | $33.12 | $42.83 |
| $45.00 | $32.18 | $3.25 | $34.80 | $45.00 |
| $50.00 | $35.75 | $3.62 | $38.67 | $50.00 |
Each figure is silver content multiplied by the spot price shown. No premium, dealer spread or wear is included.
The dollar impact is easy to underestimate. A $10 face value bag of 90% coins holds about 7.15 troy ounces of silver, so each $1 move in spot changes that bag’s melt value by about $7.15. On November 19, when spot fell $2.12, the same bag lost about $15 of melt value in a single session.
Silver also tends to move further than gold: daily moves in silver have averaged roughly 1.6 times gold’s since September 2026, according to GoldSilver’s November 19 report. Part of the reason is industrial demand. The Silver Institute’s World Silver Survey put industrial uses at about 58% of total silver demand in 2025, which ties the metal to factory orders and growth expectations as well as to interest rates. None of that tells you where spot goes next. It does mean a melt figure needs a date and a time attached to it.
What a volatile week means when you are selling
- Re-check spot on the day you sell, not the day you decided to sell.
- Write down the spot price, its source and the time you read it, so a later offer can be compared against the same number.
- Expect a dealer’s offer to sit below melt even after a large move. That gap reflects handling, refining and the dealer’s costs, not a market that is wrong.
- Treat a one-week drop or a one-week rise as a price event, not a conclusion. Melt value describes the metal at one moment; it does not forecast the next move.
How to check your coins’ melt value in 3 minutes
- Sort your coins by type and date. Separate dimes, quarters, half dollars, silver dollars and bullion coins. Set aside anything you can’t identify.
- Check which coins contain silver. Dates are a useful clue, but they are not proof. Use the reference table above, a trusted coin guide or the NGC Coin Explorer to confirm a coin's composition.
- Count the coins. Grouping identical coins makes the math easier. For example, ten standard 90% silver dimes contain about 0.723 troy ounces by the per-coin specifications.
- Look up the silver spot price. Use a current precious-metals quote, check that it is priced per troy ounce, and note the source and the time you read it. Spot prices change during the day, and a figure without a timestamp is not much use.
- Multiply silver weight by spot. For a group of matching coins, multiply the silver content per coin by the number of coins, then multiply that total by spot.
For a fast estimate of circulated 90% dimes, quarters or halves, you can use the face-value shortcut: multiply the group’s face value by about 0.715 troy ounces per $1, then multiply by spot. Treat the result as an estimate, especially for heavily worn coins.

When melt value is not the number that matters
Some coins have collector value that goes beyond their silver content. A key date is a date that is scarce or in higher demand; a mint mark is a small letter showing where the coin was made; and condition describes how much wear or damage the coin has. These details can change what a collector might pay.
Before selling a potentially scarce or well-preserved coin for melt, check its date and mint mark and compare its condition with reliable coin references or recent sales. Avoid cleaning it: cleaning can damage the surface and may reduce collector appeal. For Morgan dollars, NGC provides both melt-value information and links to collector pricing resources.
Common mistakes to avoid
- Using regular ounces instead of troy ounces: Precious-metal spot prices are usually quoted per troy ounce. Don’t mix the two units.
- Assuming every pre-1965 coin is 90% silver: Date ranges vary by coin type, and some coins with similar designs are clad rather than silver. Check each coin.
- Forgetting wear: Older circulated coins may have lost metal. Standard silver-content figures are estimates for coins in typical condition.
- Confusing silver-plated with silver: A silver-colored surface does not prove a coin contains meaningful silver. Check its composition or specifications before calculating melt value.

Frequently asked questions
How do I calculate a silver coin’s melt value?
Multiply the coin’s silver content in troy ounces by the current silver spot price per troy ounce. The result estimates the value of its silver, not necessarily its collector value or selling price.
Is a coin’s melt value what a dealer will pay?
Not always. A dealer’s offer may be below melt value, and collectible coins may sell for more than their silver content is worth. Ask how the offer was calculated, which spot price it used and when, and compare options before selling.
Does melt value change every day?
Yes. Melt value depends on the spot price, which moves during trading hours and settles at a different level each day. The silver in your coin stays the same; the number you multiply it by does not. Any melt figure should carry the date and time of the spot quote behind it.
My coins lost value this week. Did something change about them?
Probably not. If silver fell 7% over a week, a coin’s melt value fell roughly 7% too, because the silver content is unchanged and only the price moved. That is a price change, not a change in the coins or their condition.
How much silver is in a 90% silver dime?
A standard 90% silver dime contains about 0.0723 troy ounces of silver when measured at its original specifications. Wear can reduce a circulated coin’s weight.
Are Morgan and Peace dollars worth only their melt value?
No. Each contains about 0.7734 troy ounces of silver, but date, mint mark and condition can add collector value. Check those details before treating one as bullion.
Spot prices move during the day. The figure used throughout this guide is the November 19, 2026 late-afternoon reading of about $42.83 per troy ounce, and every melt value here is calculated from that one number. Check a current quote before acting on any figure above. This isn't financial advice.
To track melt value across a whole collection, try the downloadable collection tool from Vaulted Ounce. The download is free; a free account is required, and the member Oath is accepted when you create it. When you are ready to buy or sell with other collectors, the members-only trading board at Arca Mercatus is where members trade under a user id, with their real details held privately by the company.
